Repairs

Rear Sway Bar Installation

GREToday  I decided to install the new rear sway bar on the Pumkin. The product was purchased from ADDCO who has made these things forever.  The only drawback was there was a delay while they made up some more kits and the instructions could be better. I figured out where everything went except 4 washers.  […]

Read more

Triumph Rain Cover

By John Phillips   Last October Mike Billotte sent me a message, “John – I noticed a picture of your six in the latest newsletter with a cover that fits over the top and windscreen. My six leaks in a windy rainstorm. Someone here said that you have access to those covers. Are they available and […]

Read more

Removal and rework of a flywheel/ring gear assembly

By John Phillips Today our project was the  from a 74 TR6. The ring gear was being pushed from the flywheel by repeated engagement of the starter over a long period of time.  The task is to properly re-seat the gear so that the starter will engage and start the car. The car had been […]

Read more

Rebuilding the Triumph TR Transmission and Overdrive

The following documentation was gathered during the rebuild of the three transmissions shown below: (1) TR3 s/n TS24066 with overdrive model 22/1374 (2) TR4 s/n CT21820 with overdrive model 28/1447 and (3) TR6 s/n CC109568 without overdrive. These transmissions encompass most of the variations throughout the productions of the Triumph TR2-6. They are also typical […]

Read more

Rebuilding Stromberg Carburetors

By: Green Country Triumphs, Tulsa, OK I thought that I would share a few observations about a typical rebuild. I do not claim to be an expert but having rebuilt several sets with reasonable success, I thought that passing along some of my experiences my help belay any fears associated with tearing into your own. […]

Read more